Fevicol Insulation Adhesive

Product Details:

Fevicol AC Duct King Lag Coating is a new generation Synthetic Rubber based adhesive, specially developed for bonding.Pre Insulated Panels made of PIR, PU foam, Phenolic foam etc.The Adhesive is fast drying adhesive & develops quick grab which is preferred for faster rate of fabrication.

It can be easily applied at all ambient conditions by spreader/brush. It is an ideal adhesive forquick assembly of pre fabricated panels for on site construction of AC ducts.

• Indoor coating over thermal insulations for high humidity area

• UL classified for surface burning characteristics (UL-723).

• Fungal resistance (ASTM D5590.)

• Flammability resistance (ASTM 4804.)

• Conforms surface burning (ASTM E-84.)

• Meets VOC compliance of LEED 4.2 - low emitting materials paint and coatings.

• VOC 10g/l less water and exempted solvents.

• Contains no solvents

• High bond strength, low water vapour permeability

• Plastic container 5 Lts / Drum 30 Lts

Additional Information:

• Item Code: AF-5590

Product Details:

Monolithic joint free coat for protecting insulation in exposed conditions

Fevicol Weather Protect Coat is water based fire retardant, flexible, vapour barrier, high solid coat which imparts tough mechanical protection and durable seal against water, moisture & weathering. It is ideal for protecting all types of Insulation material used in Hot and Cold Insulation used in any type of Industrial / HVAC applications.

It is specially developed to enhance the insulation life since it protects the insulation from weathering for longer period of time and imparts special properties like erosion protection, water vapour barrier, and protection from fungal and algal attack. It can be used in exposed exterior and high humidity environments.

Additional Information:

• Packaging Details: 5 Kg and 25 Plastic Pail

Product Details:

FEVICOL AC DUCT KING is a Synthetic Rubber based adhesive specially developed to bond various insulationmaterial in HVAC & R industry.FEVICOL AC DUCT KING is recommended to bond Nitrile Rubber or XLPE with Galvanized Iron or Aluminium

duct surface for insulating AC Ducts, Chilled Water Pipe lines, and Underdeck / Overdeck in various industrial &residential projects.The product can be conveniently applied in low ventilated sites at remote places, as the smell is very mild.

Recommended Application Area

• AC Ducting - To bond Nitrile Rubber, XLPE, Glass Wool/Rock Wool, PUF to Duct surface
• Chilled Water piping - To bond Nitrile Rubber, XLPE, Glass Wool/Rock Wool, PUF to MS
pipe lines
• Acoustic Insulation - To Bond Nitrile Rubber to Concrete walls, Vertical surfaces & Duct lining
• Under deck/Over deck Insulation - To bond Nitrile Rubber, XLPE, Glass Wool/Rock Wool, PUF t

• Industry first Adhesive product exclusively for Ducting and Chilled Water Piping
• One adhesive for multiple application
• Higher coverage & hence low adhesive quantity required
• Very Mild smell ensures the applicators and users will not be harmed
• No added Benzene ensures that the Health of the applicators and users is not harmed
• Excellent tack
• High Spreadability & ease of application
• Strong Bond durability (Aging resistance)

Recommended Method of Application

• Clean the substrates to be bonded so that they are free from Dust/Rust/Oil/Moisture
• Stir the adhesive well before use to have a homogeneous material prior to application
• Apply Fevicol AC Duct King on both the substrates uniformly by spreader / brush. First on Non porous
substrate & then on porous substrates.
• When Glass Wool/Rock Wool substrates are bonded, application of adhesive is done only on Duct/Pipe/
Concrete substrates
• Once the adhesive becomes touch dry (When tack is developed), press both the substrates together ensuring
uniform contact so that air pockets are not formed
• Cure for 24 hrs at ambient temperature

• Tin 5 litre / Drum 30 litre

Additional Information:

• Delivery Time: 1 week
• Packaging Details: Metal Drum

Product Details:

• Can be used for pasting PVC tiles/ Rolls to Mosaic/ Concrete substrate
• Upholstery industry to bond variety of substrates like foam to foam, foam to rubber, foam to rexine, ply wood to rexine and coir to foam
• Handicraft segment,
• Bus body building and seat cover pasting

Product Details:

Fevicol AC Duct King Eco Fresh is a water based environment friendly, synthetic resin adhesive,specially developed for ducting, chilled water piping and Underdeck / Overdeck insulation applications in HVAC & R Industry.FEVICOL AC DUCT KING ECO FRESH is a Green and Safe adhesive because it has a low VOC and is Non Flammable.

It is extremely ideal for Green Certified projects as well as Safety Priority projects.
FEVICOL AC DUCT KING ECO FRESH is Flame Resistant adhesive which does not catch fire while
wet or cured.

Recommended Application Area

• Air conditioned Area for Ducting with Nitrile Rubber, Glass Wool, Rock Wool and Chilled Water Piping
with Glass Wool, Rock Wool
• Under deck / Over deck Insulation with Nitrile Rubber, EPS, Glass Wool, Rock Wool
(To be applied along with mechanical fasteners)

• Fevicol AC Duct king Eco Fresh conforms to ASTM E 84 test for Low Flame Spread Index
• Fevicol AC Duct king Eco Fresh is certified as a Class A product by Exova Warringtonfire, a renowned testing
UK Based testing agency
• Fire Resistant Water Based Formulation - Makes the Ducting / Chilled Water Piping safer against Fire hazards
• Very LOW VOC ( < 5 gms / litre ), excellent for Green Certified projects
• Ideal for Improving the Indoor Air Quality ( IAQ ) as per the Green Building Standards
• Mild Smell and Low Toxicity - Excellent for Low Ventilated Areas and Safe for Occupants / Applicators
• Excellent Spreadability - Lower application costs ensures a better Cost Benefit than rubber based adhesive.
• Low Application Cost – Higher coverage & hence low adhesive cost per unit area
• Excellent tack - Longer Tack retention/open time
• Strong Bonding – Very strong Bonding ensuring zero reworking costs.

Recommended Method of Application

• Clean the substrates to be bonded so that they are free from Dust/Rust/Oil/Moisture
• Stir the adhesive well before use to have a homogeneous material prior to application
• Apply the adhesive by spreader only in thin uniform layer on both the substrates. Do not use brush.
• For faster tack development & bonding, thin layer of adhesive is mandatory
• Once the tack is developed, bonding of the substrates can be done even after 2 hrs unlike rubber
based adhesive
• Allow to develop tack (Best judged by change in colour from whitish to colourless)
• Press it uniformly by hand pressure taking care that no air pockets are formed
• Cure for 24 hrs at ambient temperature
• When glass wool/rock wool substrates are bonded, application of adhesive is done Only on Duct/Pipe/
Concrete substrates

• Plastic container 5kg/Drum 20 kg.